Pixels to Inches Converter
A pixel has no size until you tell it where it will live. Enter the pixels and the density (PPI) of the screen or print, and this pixels to inches converter returns the real-world size — inches and centimetres — in both directions.
A Pixel Is a Count, Not a Length
The single idea this page exists to teach: pixels measure how many, never how big. A 1920-pixel image is 20 inches wide on a 96-PPI reference screen, 6.4 inches in a 300-PPI print, and 4.4 inches on a 440-PPI phone — the same file, three physical sizes, all correct. The conversion is one division (pixels ÷ density = inches), and every confusion in the field comes from forgetting the divisor: the "72 DPI" inherited from early Macintosh screens (and still haunting image software defaults), the "300 DPI" print rule quoted without the "at final size" that gives it meaning, the screenshot that prints tiny because its pixels were spread at print density. PPI (pixels per inch, screens and files) and DPI (dots per inch, printers) are used interchangeably in casual speech and are the same input here — the number of image samples laid along one inch of output. Hold the divisor in view, as this converter forces you to, and the whole topic collapses into the one division it always was.
Worked Example: The 1920 Standard and the Print Test
The defaults are the web's native size: 1920 px at 96 PPI = 20 inches (50.8 cm) — the full-HD width as CSS reference pixels, the number web designers implicitly picture. Now hand the same 1920 px to a printer at 300 PPI and it becomes 6.4 inches: perfectly sharp, credit-card-to-postcard territory — which is why a "high-resolution" web image disappoints as a poster. The print test runs the other way: a 10-inch print at 300 PPI needs 3,000 px across, the figure photographers check before promising a size, and an A4/Letter page at 300 wants roughly 2,480 × 3,500 px. Between the two examples sits the whole practical doctrine: screens ask how many pixels you have; print asks how many pixels per inch of the promised size — and this converter is the desk where the two questions are reconciled, in inches and centimetres both, because print shops outside the US promise sizes in centimetres.
CSS Pixels, Device Pixels and the Retina Doubling
Screens complicated the story by splitting the pixel in two. The CSS pixel is a unit of layout — defined so that 96 of them make a reference inch at arm's length — while the device pixel is a physical dot of the panel, and modern displays pack two or three device pixels into each CSS pixel per side (devicePixelRatio 2 or 3). Consequences this converter helps untangle: a phone advertising a 1170 × 2532 screen shows a CSS viewport a third that width; an image exported at 2× for retina sharpness (say 1000 device px) displays at 500 CSS px, which at the reference density is 5.2 inches of layout; and "how big will this appear" questions must name which pixel they mean before any converter can answer. The rule of thumb that survives the tangle: design in CSS pixels, export images at twice (or thrice) the display size for sharpness, and use this page's plain division whenever pixels meet a physical promise — a printed banner, a machined panel cutout, a screen of known physical size.
Print Sizes: The Photographer's Table in Prose
The recurring print questions reduce to one table of products: at 300 PPI, a 4×6 in photo needs 1200 × 1800 px; 5×7 needs 1500 × 2100; 8×10 needs 2400 × 3000; A4 needs about 2480 × 3508; a 24×36 in poster needs 7200 × 10800 — the last figure explaining why poster work comes from medium-format files or accepts 150 PPI (3600 × 5400) at viewing distance, the standard compromise: density requirements fall as viewing distance grows, because the eye's resolution is angular. Billboards are printed at 10–30 PPI and look perfect from thirty metres; the same file at arm's length is a mosaic. The converter's input field accepts any density precisely because "300" is a rule for arm's-length print, not a law of nature — enter the density your output actually demands and the inches follow honestly.
Scanning and Archiving: Where PPI Is a Promise About the Future
One more domain runs on this division with unusual seriousness: scanning. A photograph or document scanned at 300 PPI can be printed at its original size forever; scanned at 600, it can be printed at double size or cropped hard and still print at the original; scanned at 150, it is a screen image wearing an archive's clothing — adequate today, a dead end for every future use. Archivists therefore scan at 400–600 PPI for masters (a 4×6 print at 600 PPI is 2400 × 3600 px, the file arithmetic this converter performs), accepting large files as the price of never needing the original again — originals fade, get lost, burn; pixels at sufficient density are the insurance. The same arithmetic governs the reverse promise: a museum offering a painting "at 300 PPI" is stating the largest faithful print the file supports, and the claim is checkable by anyone with the file's pixel count and this page's division. Density, in the archive, is not a technicality — it is the difference between a copy and a preservation, between an image that can be reprinted at its subject's true size in a hundred years and one that can only ever be looked at on the screens of its own decade.
Related Tools
More from the Conversion Calculators hub: the Px to Em Converter — the other pixel crossing, into typography — the Meters to Feet Converter for the inches once they grow up, and the Color Converter for the pixels' contents.
Frequently Asked Questions
How many pixels are in an inch?
Exactly as many as the density says: 96 in the CSS reference inch, 300 in a print inch, 72 in the legacy screen inch, 440 or so in a flagship phone's physical inch. The question has no density-free answer — that is the article's thesis in one line — and any tool or chart that answers it with a bare number has silently chosen a density for you, usually the 96 of the screen world or the 72 of its prehistory, neither of which your printer has ever heard of. This converter makes you choose it in the open, which is why its second field exists.
How big is 1080p in inches?
1080 px vertically (and 1920 horizontally) is 11.25 CSS inches tall at 96 PPI — but on physical screens it is whatever the panel measures: a 24-inch 1080p monitor is 20.9 inches wide of actual glass (about 92 physical PPI), a 6-inch phone showing 1080 across is over 350 PPI. The resolution names the count; the panel names the size; the density is the ratio of the two, computable from either direction with the division this page performs.
What PPI do I need for a sharp print?
300 PPI at the final size for anything read at arm's length — magazines, photos, books — the density at which pixels fall below the eye's resolution at that distance. Large formats viewed from farther away step down gracefully: 150 PPI serves posters, 100 serves banners, and trade-show graphics are routinely 72–100. When the file cannot reach the target at the promised size, the honest options are a smaller size, a lower density with more viewing distance, or upscaling software — the converter tells you which situation you are in before the printer does.
How do I convert inches back to pixels?
Multiply by the density: inches × PPI = pixels. Ten inches at print density is 3,000 px — the worked example run backwards. The reverse direction is the production question (a client promises a 10-inch print; how many pixels must the file hold?), and it is answered by the same two numbers with the operation inverted, which is why this page prints the formula in its first section rather than hiding it behind the button.
Are DPI and PPI the same thing?
For this conversion, yes — both name how many samples land in an inch of output. Strictly, they belong to different machines: PPI counts image pixels (the file's samples), DPI counts printer dots (the ink droplets), and a printer lays several dots per pixel to render its colour — which is why a "1200 DPI printer" still wants 300 PPI images. The vocabulary merged in everyday use, and every tool in the chain (this one included) treats the image-side number as the input. When a print shop specifies a number, it is always the PPI of your file at the promised size that they mean, whatever letter they say it with.
Why did my image print smaller than it looked on screen?
Because your screen displayed it at (roughly) 96–110 physical PPI while the printer laid it at 300: the same pixels, spread three times thinner per inch — no, three times denser — occupying a third of the width. Nothing was lost or shrunk in the file; the two devices simply apply different default densities, and print software that respects the file's stated DPI metadata makes the choice explicit. The prevention is this page's arithmetic done in advance: promise only the inches your pixels can cover at the density the output demands.