Meters to Feet Converter
The world’s two height-and-length dialects, translated exactly. Enter metres for feet and inches, or feet and inches for metres, and this meters to feet converter does the crossing in both directions with the exact international factor — no rounded 3.28 shortcuts.
The Exact Bridge: 25.4 Millimetres
Every imperial-metric length conversion crosses one treaty-defined bridge: since 1959 the international inch is exactly 25.4 mm, which fixes everything downstream — a foot is exactly 0.3048 m, and a metre is exactly 1/0.3048 = 3.280839895… feet. The calculator works through inches (metres × 39.3701) because the feet-and-inches answer people actually want is an inch count divided by twelve, and working in the smallest common unit keeps the rounding honest to the last digit shown. The distinction between the exact factor and its bar-room abbreviation (3.28) is worth its paragraph: over a person's height the difference is under a millimetre — nothing — while over a kilometre of pipeline the shortcut loses 84 centimetres, which is why surveys, machine shops and this page refuse the abbreviation, and why the reverse direction (feet into metres) should always multiply by 0.3048 rather than divide by 3.28 and inherit the shortcut's error twice. The National Institute of Standards and Technology maintains the US's official conversion guidance (NIST unit conversion resources) on exactly these definitions.
Worked Example: 1.75 Metres, the Height Everyone Converts
The default is the conversion asked a million times a day, because 1.75 m is a common human height quoted in the metric world and demanded in feet by the imperial one: 1.75 m = 5.7415 feet, which as feet-and-inches is 5 feet 8.90 inches — call it 5′9″, the rounding every profile page performs silently. The reverse journey calibrates the other direction: 6 feet exactly is 1.8288 m, and the six-footer's metric identity (1.83 m) is the other fixed point worth memorising. A third anchor, for rooms and lumber: 3 metres is 9.8425 feet — just under 9 ft 10¼ in — which is why a "3-metre" ceiling or board is not interchangeable with a 10-foot one, a 4-centimetre gap that has failed more than one transatlantic furniture order. Carry the three anchors (1.75 m ≈ 5′9″, 6 ft = 1.83 m, 3 m ≈ 9′10″) and most daily crossings can be estimated before the calculator confirms them.
The Table: Common Lengths in Both Dialects
Reference conversions earn their place when the same lengths recur: 1 m = 3.2808 ft (3 ft 3.37 in); 2 m = 6.5617 ft (6 ft 6.74 in) — the door height of the metric world; 5 m = 16.4042 ft; 10 m = 32.8084 ft; 100 m = 328.084 ft — the sprint straight, in the imperial tongue a football field and change; 1 km = 3,280.84 ft, the figure that pairs with 0.6214 miles in every traveller's head. Sports are the table's living users: the high-jump and pole-vault worlds measure in metres and report to American audiences in feet, the 10-metre platform is 32.8 feet of consequence, and a 2.45 m high jump (the men's world record neighbourhood) is 8 feet and a whisper — conversions sport performs constantly and rounded factors get visibly wrong, because at the elite margin the whisper is the story. Building trades run the same table at larger stakes, in the next section's direction.
Construction, Land and the Cost of a Sloppy Factor
Mixed-unit projects are where conversion stops being trivia. A set of metric drawings built by an imperial crew (or the reverse) multiplies every dimension by the factor; an error in the factor does not average out — it scales the whole structure's mistake, the nightmare being the near-miss factor (3.28 for 3.28084) that produces parts almost fitting, discovered at assembly. Land is the quieter case: a hectare is 2.471 acres (an area conversion built from this page's linear one, squared), and property quoted across systems needs the square of the exact factor, not the factor squared approximately. Aviation keeps its own peace treaty — altitude in feet worldwide, runway lengths increasingly in metres — and its crews convert with the exact factor as a matter of regulation. The calculator's four-decimal honesty is calibrated to these uses: estimation can round, construction cannot, and the same tool serves both because it states its factor in the open, in the note, every time.
One Sky, Two Systems: Aviation's Treaty and the Sea's Mile
Two domains live permanently on the border this page patrols, and their treaties are instructive. Aviation flies in feet — altitude and flight levels are feet worldwide, a British-American inheritance the metric world accepts for safety's sake — while quoting visibility and runway length in metres in most of the world, so a single weather report crosses the factor twice and crews convert as reflex. (The famous exception, Chinese airspace's metric flight levels in metres, requires conversions at its boundary that are trained and checked like landings.) The sea keeps a third unit entirely: the nautical mile, 1,852 metres exactly — one minute of latitude — whose feet figure (6,076) sailors know as precisely as landsmen know 5,280, and whose existence means maritime distances cross to feet by a different bridge than land distances do. The lesson generalises the whole conversion hub: the factor is never merely arithmetic, it is a border crossing between professional cultures, each with its own reasons — and the traveller who knows the reasons converts carefully in both directions. Pilots and sailors pass examinations on exactly this care, because at altitude and at sea a conversion is not a description of the world but an instruction to act in it, with the world answering immediately when the instruction is wrong.
Related Tools
More from the Conversion Calculators hub: the Height Converter — this crossing specialised for people, in centimetres too — the Color Converter, and the Pounds to Stone Converter for the mass dialect of the same divide.
Frequently Asked Questions
How many feet is 2 metres?
6.5617 feet — as feet and inches, 6 feet 6.74 inches. The 2-metre figure is the standard door and the tall person's threshold in the metric world, and its imperial form explains a common experience: a 2 m doorway (6′6¾″) clears a six-foot-six visitor by three quarters of an inch, no more. Enter 2 in the calculator and it returns both forms; enter 6 and 7 in the reverse direction and you get 2.0066 m — the same doorway measured from the other shore, a hair over the nominal two metres.
Is a metre longer than a yard?
Yes — by 3.37 inches: a yard is 0.9144 m exactly, so a metre is 1.0936 yards. The near-equality is a standing trap in fabric, sport and fencing orders, where "ten metres" and "ten yards" differ by nearly a metre across the order. The two units' similarity is historical coincidence (both grew from body measures), and the calculator's precision exists because the coincidence tempts people to treat them as equal — a 9 percent error wearing a friendly face.
How do I convert centimetres to feet?
Divide by 30.48 (a foot is 30.48 cm exactly) — or move the decimal to metres first and use this page: 180 cm is 1.8 m is 5.9055 feet. Centimetres are the height dialect of the metric world, so the height converter beside this page takes them natively; the present tool's metre input accepts decimals, and 1.8 is all the translation a centimetre figure needs. The chain cm → m → ft is two exact steps, and doing it in one (cm × 0.0328084) is the same arithmetic with the middle hidden.
Why is the factor not a round number?
Because the two systems grew independently — the metre from a fraction of the Earth's meridian, the foot from human feet and their subdivisions — and any bridge between independent histories is an irrational-looking ratio. The 1959 agreement made the ratio exact by defining the inch from the millimetre, choosing 25.4 as the value closest to the existing inch's several national variants. The non-roundness is thus the price of unification, paid once, in a treaty, so that every conversion since can be exact — this page's 3.280839895 is that treaty's number, not an approximation of one.
How many feet is 50 metres?
164.042 feet. Fifty metres is the Olympic pool's length and a common building dimension, and its imperial figure (just over 164 feet) is worth noticing for what it is not: not 150 feet, the estimate the yard-confusion produces (50 yards would be 45.72 m), and not 165, the 3.3-shortcut's answer. A 4-metre error across a pool's worth of concrete is the kind that the exact factor — and this calculator — exists to prevent; the shortcut's answer is fine for describing the pool and useless for building it.
How long is a marathon in feet?
42.195 kilometres is 138,435 feet — and 26 miles 385 yards in the imperial system's own dress, the race's odd length (standardised for the 1908 London Olympics' royal viewing box) having been defined in imperial first and metricised after. The figure is a reminder that conversions run between histories as much as between units: the marathon's metre count (42,195) looks arbitrary until its feet-and-yards ancestor explains it, just as the metre's own definition looks arbitrary until the meridian explains it. Every unit is a story; the factor is the translation.