Sector Area Calculator

A sector is the slice of a circle cut by two radii — the pizza slice, the pie-chart wedge, the wiped arc of a windscreen. Enter the radius and the angle, and this sector area calculator returns the slice’s area, its arc length, and the segment beyond the chord.







Two Formulas, One Idea: The Fraction of the Turn

A sector is a fraction of a circle, and the angle states the fraction: θ/360 of the full turn (in degrees) or θ/2π (in radians). Every quantity scales by that fraction. Area = (θ/360) × πr² — the circle's area, sliced. Arc length = (θ/360) × 2πr — the circle's rim, sliced by the same fraction. In radians the formulas shed their scaffolding and become the two cleanest in the topic: area = ½r²θ, arc = rθ — which is not a coincidence but the reason radians exist: the angle measured as arc-per-radius makes the sector's arithmetic trivial, and calculus inherits the simplicity. The third output, the segment, is the sector minus the triangle formed by the two radii and the chord: ½r²(θ − sin θ) in radians — the cap-shaped region between chord and arc, the shape of a partially filled pipe's cross-section and a Gothic arch's head. Wolfram MathWorld's circular sector article gathers the family's formulas, segment included.

Worked Example: r = 10, θ = 60°

The defaults cut a sixth of a circle (60° is 360/6): area = (1/6) × π × 100 = 52.3599 square units; arc = (1/6) × 2π × 10 = 10.4720; segment = ½ × 100 × (π/3 − sin 60°) = 50 × (1.0472 − 0.8660) = 9.0586. Read the three as a portrait: the segment is barely a sixth of the sector — at shallow angles the cap is a sliver of the slice, because the triangle (43.3013 here) fills most of it. Two landmarks fix the scale: at 90° the sector is exactly a quarter circle (78.5398 at r = 10), the quadrant of every protractor exercise; at 180° it is the semicircle (157.0796), where the segment and the sector coincide because the chord is a diameter and the triangle vanishes. And a radian-native check: θ = 1 radian (57.2958°) at r = 10 gives area exactly 50 — ½r²θ with θ = 1 — the cleanest verification that the radian formulas are the true ones and the degree versions their converted shadows.

Where Sectors Are Measured

The slice is one of applied geometry's workhorses. Pie charts and data graphics are sector arithmetic drawn: a category's angle is its share of 360°, and its slice's area is honest exactly because area scales with angle at fixed radius — the chart's integrity is this page's formula. Irrigation and coverage: a sprinkler's throw is a sector (radius the range, angle the sweep), and the watered area prices pipe, pressure and overlap — centre-pivot fields are sector farms at landscape scale. Windscreen wipers, radar sweeps, lighthouse beams, security-camera cones flattened to plans — every coverage question with a pivot and a swing is a sector asking its area. Machine parts: gear teeth spacing, cam lobes and rotary valves are dimensioned in sector angles. And the segment's solo career: the liquid in a horizontal cylindrical tank (the filled cross-section is a segment whose angle the depth sets), the arch over a doorway, the acreage of a field bounded by a road's curve. Wherever something turns about a centre and the question is "how much does it cover", the sector is the shape and this page is its measure.

Degrees, Radians and the Chord: Working Habits

Three habits keep sector work clean. Fix the unit before the arithmetic: the formulas differ by the 360/2π scaffolding, and mixing a radian angle into the degree formula (or the reverse) is the topic's standard disaster — the calculator's unit selector exists so the choice is made once, out loud, before any number moves. Remember the arc is not the chord: the arc curves (10.4720 in the example), the chord cuts straight (2r sin(θ/2) = 10 exactly at 60° — the hexagon's side, equal to the radius), and material ordered by one measure and fitted by the other fails by exactly their difference. Convert percentages through the angle: a pie-chart share of 25 percent is 90°, of 12.5 percent is 45° — the angle is the share in geometric dress, and entering shares as angles (or angles as shares of 360) is the same translation the whole fraction family on this hub keeps teaching: one quantity, several costumes, exactness in the middle.

The Annular Sector: A Slice With a Hole

Real slices often have the centre missing — a washer-shaped wedge, a curved corridor, the part of a sprinkler's sweep that falls beyond the patio it must not water. The annular sector (a sector of a ring) is the same fraction of an annulus: area = (θ/360) × π(R² − r²), the ring's area sliced. At the worked example's angle with R = 10 and r = 6: (1/6) × π × (100 − 36) = 64π/6 ≈ 33.5103 square units — the full sector's 52.3599 minus the inner sector that was never there (18.8496, the same fraction of the smaller circle). Race tracks, curved bleacher sections, doughnut-chart rings (the pie chart's modern costume is exactly a stack of annular sectors), and the swept volume of a windscreen wiper — whose blade covers a ring sector, not a disc sector, since the arm's mount blocks the centre — all price themselves by this subtraction. Compute the two sectors and subtract, or slice the ring directly; the agreement of the two roads is the fraction principle working twice, and wiper coverage (a genuine vehicle-safety specification) is computed by precisely this formula.

Related Tools

More from the Math Calculators hub: the Area of a Circle Calculator — the whole from which sectors are cut — the Circumference Calculator, and the Diameter of a Circle Calculator.

Frequently Asked Questions

What is the sector area formula in radians?

A = ½r²θ, with θ in radians — the form calculus prefers and the form that makes the worked example's 1-radian check exact (½ × 100 × 1 = 50). The degree form, (θ/360)πr², is the same statement after substituting θ_rad = θ_deg × π/180: ½r² × θπ/180 = θπr²/360. Two costumes, one quantity; the calculator accepts either unit and computes in the radian core, so its two doors provably agree.

What is the difference between a sector and a segment?

The chord. A sector is bounded by two radii and the arc — the slice with its point at the centre. A segment is bounded by one chord and the arc — the cap without the point. Segment = sector − triangle, and the triangle is the wedge formed by the two radii and the chord (½r² sin θ). At angles under 180° the segment is the smaller cap; past 180° the "major segment" is what remains of the circle after the minor segment leaves — the calculator's segment output uses the entered angle's own cap, so angles past a half-turn report the major segment consistently.

How do I find the angle from an area?

Undo the fraction: the sector's share of the circle is A/(πr²), and the angle is that share of the turn — θ = 360A/(πr²) in degrees, or 2A/r² in radians. A sector of area 52.3599 at r = 10 is 52.3599/314.159 × 360 = 60°, the worked example recovered. Fan and coverage design runs this direction constantly — a required watered area at a known throw sets the swing angle — and the formula is the calculator read backwards, as inversions in this family always are.

What is the perimeter of a sector?

Arc plus the two radii: P = rθ + 2r in radians (10.4720 + 20 = 30.4720 in the example). The two straight edges are the part intuition forgets — a slice has crust and cut sides, and fencing, edging or piping a sector needs both. Note the semicircle's special case: πr + 2r, the curved half plus the diameter, a perimeter students lose marks on by reporting the arc alone; this page's arc output plus two radii is the complete figure, every time.

What is the area of a quarter circle with radius 6?

A quarter circle is the 90° sector: (90/360) × π × 36 = 9π ≈ 28.2743 square units, with arc (90/360) × 2π × 6 = 3π ≈ 9.4248 and perimeter 9.4248 + 12 = 21.4248. It is the commonest sector in the built world — every rounded corner, quarter-landing and corner cabinet is one — and its numbers at radius 6 are worth holding as the calibration set for the whole topic: if a sector answer at 90° is not a quarter of the parent circle's, the angle fraction, not the circle, is where the error lives.

Can the angle exceed 360 degrees?

Geometrically the slice stops meaningfully at the full turn — past 360° the sector wraps over itself — but the formulas continue without complaint (a 450° "sector" computes as a circle plus a quadrant), which is occasionally the honest description of a rotating sweep counted in total travel. For a static shape, reduce the angle modulo 360 and take the slice that remains; for a sweep's accumulated coverage, the multi-turn figure is the area-time product engineers actually integrate. The calculator computes what it is given; the interpretation, as ever in this family, is the user's craft.